HARDENER WEGPOXI 88 HT
Allows for high thickness application (20+ mils) and two-coat systems, two-component polyamine epoxy direct to metal with anti-corrosion pigments for steel surface. High-build, two-component polyamine epoxy direct to metal with anti-corrosion pigments for steel surface. Product developed for application on dry, wet and hydroblasted surfaces and on a specific primer.
Recommended Uses: Ships, offshore and marine structures: Ballast and fuel tanks, decks, oil exploration platforms and on-board machinery. Piles all along their length, service structures permanently immersed in fresh or salt water in port facilities (under direction of WEG Technical Department). Industrial applications: Pulp and paper, chemical and petrochemical, bridges, metal structures, interior of thickeners and mechanisms, such as flotation cells (on request). Piping: It can be applied in the interior and exterior of pipes (overhead or buried). Maintenance coating: This product can be used in the maintenance coating of the exterior of tanks in operation where the substrate temperature is not above 70 °C. For this situation, use 150 microns of dry thickness.
Volume: 0,72 L.
Pack: CAN.
Sku: 10004519.
HARDENER WEGPOXI 88 HT Data Sheet
Complements Line is a great quality product with excellent anticorrosive properties.
How To Apply
Volume solid: 85 ± 2% (ISO 3233).
Shelf-Life: 24 months at 25°C.
Thickness per coat (dry): 160 µm –500 µm.
Theoretical coverage: 2,26 m2/l without dilution in the thickness of 375 µm dry. Without considering loss factors in application.
Resistance to dry heat: Maximum temperature 120 °C . The product retains its physical and chemical properties up to the temperature of 120 °C however, variations in the coating color and gloss may occur from 60 ºC.
Drying:
Touch: 5°C / 8 hours | 15°C / 6 hours | 25°C / 3 hours | 40°C / 2 hours.
Handling: 5°C / 30 hours | 15°C / 16 hours | 25°C / 8 hours | 40°C / 5 hours.
Final: 5°C / 336 hours | 15°C / 240 hours | 25°C / 168 hours | 40°C / 144 hours.
Pot Life: 5°C / 3 hours | 15°C / 2 hours | 25°C / 90 minutes | 40°C / 45 minutes.
Overcoating Drying:
Min: 5°C / 30 hours | 15°C / 16 hours | 25°C / 8 hours | 40°C / 5 hours.
Max: 5°C / 14 days | 15°C / 10 days | 25°C / 7 days | 40°C / 5 days.
Complements Line is a professional product. For best results, application by a specialist certified applicator is recommended. For applicator training and certification at our purpose-built workshop, please get in touch.
